International Components home page
 
Push-In Fittings : SM - Liquid Tight Straight and 90° Snap Elbows 
    Push-In Fittings and Corrugated Conduit
       
SM - Straight
The fastest and most labor saving method to connect flexible nylon conduit to a push-in fitting.  The Nylon conduit is inserted into the fitting until the hook snaps over the ridge of the corrugated tubing.  The conduit can be mounted rigid for liquid tight (NEMA 4x) or turnable for non-liquid tight (NEMA 2).

SM - 90° Snap Elbows
Combines the unique 90° snap elbow and straight push-in fitting for easy installation of wires into an elbow fitting.  The "straight" elbow is snapped together after the wires have been installed, resulting in a liquid tight 90° elbow.
Description Material Operating
Temperature
Fittings Nylon 6/6 -40°F to 212°F
(-40°C to 100°C)
Standard
Conduit		 Nylon 6 -40°F to 230°F
(-40°C to 110°C)
Super Flex
Conduit		 Modified Polyester
Elastomer		 -58°F to 266°F
(-50°C to 130°C)
Push-In Fitting Details
    
  • Fastest installation of flexible NYLON conduit.
  • Liquid tight - will meet NEMA 4x.
  • O-Ring Thread seal.
  • No tools required!  Simply push the flexible conduit into the fitting.  The locking hook retains it securely in position.
  • To remove conduit, lift outside recessed tab with screwdriver.
   
PART NUMBER THREAD
TYPE
AND
SIZE		 DIMENSIONS (INCHES)
SM - Straight
 SM - Elbow
 A
Mount
Hole
+.010"
.000		 B
Thread
Length		 C
Body
Length
Nipple		 D
Body
Length
Elbow		 E
Height
Elbow		 F1/F
Wrench
Flats
Black Black
 ICSM09AA-BK
ICSM09NA-BK		 ICEM09AA-BK
ICEM09NA-BK		 PG 9
3/8" NPT		 .60
.68		 .31
.59		 .91
.91		 2.03
2.03		 .91
.91		 .75/.67
.75/.67
 ICSM11AA-BK
ICSM13AA-BK		 ICEM11AA-BK
ICEM13AA-BK		 PG 11
PG 13.5		 .73
.80		 .31
.35		 .98
1.10		 2.22
2.48		 1.06
1.20		 .87
.94
 ICSM16AA-BK
ICSM16NA-BK		 ICEM16AA-BK
ICEM16NA-BK		 PG 16
1/2" NPT		 .88
.83		 .39
.51		 1.14
1.14		 2.62
2.62		 1.28
1.28		 1.06
1.06
 ICSM21AA-BK
ICSM21NA-BK		 ICEM21AA-BK
ICEM21NA-BK		 PG 21
3/4" NPT		 1.12
1.05		 .43
.51		 1.26
1.26		 3.19
3.19		 1.57
1.57		 1.30/1.38
1.30/1.38
 ICSM29AA-BK
ICSM29NA-BK		 ICEM29AA-BK
ICEM29NA-BK		 PG 29
1" NPT		 1.47
1.35		 .43
.75		 1.38
1.38		 3.86
3.86		 2.03
2.03		 1.65
1.65
 ICSM36AA-BK
ICSM48AA-BK		   PG 36
PG 48		 1.85
2.34		 .51
.55		 1.61
1.81		 --
--		 --
--		 1.97
2.52
   
90 degree Snap Elbow Nylon Fittings   90° Elbow    Straight Dome and Flex Nut Nylon Fittings   Straight     Multi-Cable Nylon Fittings   Multi-Cable

 

 

Corrugated Conduit : Standard and Super Flex 
  
Push-In Fittings and Corrugated Conduit
 
STANDARD and SUPER FLEX Conduit
The Standard corrugated conduit is made of flame retardant nylon.  The conduit is sutable for fixed and moderately flexing installations.

The Super Flex conduit is made of a special plastic blend greatly increasing the flex-life of the conduit.  It is the perfect solution for drag chain and robotics applications, with a high cycle life expectancy, UV and impact resistance at low temperatures, tough and abrasion resistant.  Nominal conduit sizes 23, 37 and 50 fit the ST or ET fittings only.  Size 14 is not available in this material.

SPECIFICATIONS:
Liquid tight per NEMA 4x (IP 65)
Materials (Black) :
Conduit (Standard) :      Nylon 6
Conduit (Super Flex) :   Modified Polyester Elastomer
      Other conduit materials are available.
Fittings and Brackets :  Nylon 6/6
Operating Temperature :
Nylon 6 & 6/6 :  -40°F to 230°F (-40°C to 110°C)
Modified Polyester Elastomer :  -58°F to 266°F (-50°C to 130°C)
  
PART NUMBER Thread
Type
and
Size		 Nominal
Conduit
Size		 Roll
Length
(feet)		 Conduit ID x OD
Inches (mm)
Standard
Nylon		 Super Flex
Modified
Polyester
Elastomer
ICSM-0811-BK
ICSM-1013-BK		  
ICSM-1013-HY		 PG 7 
PG 9 - 3/8" NPT		 8
10		 164
164		 .33 x .44 (8.5 x 11.2)
.39 x .51 (10.0 x 13.0)
ICSM-1216-BK
ICSM-1419-BK		 ICSM-1216-HY
  		PG 11
PG 13.5		 12
14		 164
164		 .47 x .61 (12.0 x 15.5)
.55 x .73 (14.0 x 18.5)
ICSM-1721-BK
ICSM-2328-BK		 ICSM-1721-HY
ICSM-2328-HY		 PG 16 - 1/2" NPT
PG 21 - 3/4" NPT		 17
23		 164
164		 .65 x .83 (16.5 x 21.0)
.89 x 1.12 (22.5 x 28.5)
ICSM-2934-BK
ICSM-3642-BK		 ICSM-2934-HY
ICSM-3642-HY		 PG 29 - 1" NPT
PG 36		 29
37		 82
82		 1.12 x 1.36 (28.5 x 34.5)
1.42 x 1.65 (36.0 x 42.0)
ICSM-4854-BK
 ICSM-4854-HY
 PG 48 50 82 1.87 x 2.13 (47.5 x 54.0)

 

 

Snap-in Mounting Brackets 
  
Mounting Brackets for Corrugated Conduit Mounting Bracket Details

Holds conduit securely in place.
Material : Black Nylon 6/6
 
PART NUMBER
BRACKET		 Fits Nominal
Conduit
Size		 DIMENSIONS (INCHES)
A
Width		 B
Length		 C
Height		 D
Mtg.
Hole
Dia.		 E
Mtg.
Hole
Recess
Dia.
 Black
ICMB-09-BK
ICMB-11-BK		 10
12		 .49
.49		 1.18
1.18		 .91
.91		 .18
.18		 .30
.30
ICMB-16-BK
ICMB-21-BK		 17
23		 .59
.63		 1.38
1.65		 1.18
1.50		 .22
.26		 .37
.46
 ICMB-29-BK
ICMB-36-BK		 29
37		 .63
.71		 2.00
2.40		 1.69
2.01		 .26
.26		 .46
.46
 ICMB-48-BK
 50
 .75
 2.91
 2.52
 .26
 .46
 

Back   Home

Product list - Nylon Fittings - Brass Fittings - Heyco products - Misc. parts
Contact us - Request a catalog