IC - Intl submersible liquid tight nylon gland strain relief fitting

Liquid Tight Nylon Strain Relief Fittings

Applications Wherever a metal strain relief fitting is used, this Nylon Strain Relief fitting can be substituted to save you money without sacrificing performance. Typical applications are: Control cabinets, car washes, hot tubs, instrumentation,	Time Saving Installation Simply push the cable throught the installed strain relief fitting and tighten the dome or flex nut. If a snap elbow is used, push the cable through the straightened elbow, snap 90° and then tighten the dome or flex nut for a
carpet cleaning machines, food processing equiptment, underground for direct burial, underwater to 300 ft. (150 PGIG) Non - Corrosive The Nylon strain relief fittings are resistant to salt water, weak acids, weak alkalis, alcohol, esters, ketones, ether, gasoline, mineral, animal, and vegetable oil.		liquid tight connection. No disassembly of the fitting is required. Insert cable - Tighten Nut - Finished! Liquid Tight Exceeds NEMA 4x or 6 specs. For submersed applications, use an O-Ring or Seal Ring between the body and housing. Either tap the housing or secure it in a panel hole with a lock nut.
Large Range 10 sizes and 4 styles (Straight fittings and Snap-Elbows with dome and flex nuts) accomodate cable diameters from 1/16" to 1-3/4".	Flex Nut The Dome Nut can be substituted with a Flex Nut. Kinking and caving of the cable is eliminated with the use of the Flex Nut.
Nylon Fittings available: 90° Elbow Straight Multi-Cable Push-in